Chicago Pneumatic RediPower RP8250 Series страница 4 Скачать руководство пользователя

Страница: 4 / 34

RP8250/8252/8253

Impact Wrench

All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks,
model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.

EC DECLARATION OF CONFORMITY

We,  Chicago  Pneumatic  Tool  Co.  LLC,  13325
Carowinds  Blvd.,  Charlotte,  NC  28273  USA,  declare
under our sole responsibility that the product to which
this  declaration  relates,  is  in  conformity  with  the
requirements of the Council Directive of June 1998 on
the  approximation  of  the  laws  of  the  Member  States
relating to machinery (98/37/EC).

Machine Name

RP8250/8252/8253 Impact Wrench

Machine

Type

Assembly Power Tool for Threaded

Fasteners - No other use is permitted.

Serial

No.

Tools with No. C-00501-2007 or higher

Technical

Data

1/2" (12mm) Sq. Dr. Std. & 2”Extended Drive
Air pressure 90 psi (6.2 bar)
Air Consumption 13.6 l/s (29 cfm)

Harmonized

Standards

Applied

EN792-6

National

Standards

Applied

ISO 8662-7, ISO 15744-

2002

Name

And

Position

Issuer

Bruno Blanchet,

General Manager

Signature

Issuer

Date

Issue

March 15, 2008

Noise & Vibration Declaration*

Sound pressure level 94 dB(A) in accordance with
ISO 15744-2002. For sound power, add 11 dB(A).

Vibration value 7.9 m/s , re. ISO 8662-7.

*These declared values were obtained by laboratory
type testing in compliance with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
higher than the declared values. The actual exposure
values and risk of harm experienced by an individual
user are unique and depend upon the way the user
works, the workpiece and the workstation design, as
well as upon the exposure time and the physical
condition of the user. We, Chicago Pneumatic,
cannot be held liable for the consequences of using
the declared values, instead of values reflecting the
actual exposure, in an individual risk assessment in a
work place situation over which we have no control.

INSTRUCTION MANUAL

This product is designed for installing and removing
threaded fasteners in wood, metal and plastic. No other use
permitted. For professional use only.

Air Supply Requirements

1. Supply tool with 90 psig (6.2 bar) of clean, dry air. Higher

pressure drastically reduces tool life.

2. Connect tool to air line using pipe, hose, and fitting sizes

shown in the diagram.

Lubrication

1. Use an air line lubricator with SAE #10 oil, adjusted to

two (2) drops per minute. If an air line lubricator cannot
be used, add air motor oil to the inlet once a day.

2. Use 2 oz. (52 ml) of CP Pneu-Lube Synthetic Clutch

Grease 8940158455.

Operation

1. The intended use of this impact wrench is with impact

rated sockets operating upon threaded fasteners. To
operate, pull trigger on handle. To operate in forward
rotation, turn reverse valve toward forward arrow position.
To operate in reverse, turn valve toward reverse arrow
position.

2. This impact wrench is equipped with a regulator to

enable adjustment of output power. Turn the regulator
lever to # 3 for maximum power, to # 1 for minimum
power.

Maintenance

1. After first year, disassemble and inspect air motor and

impacting clutch every three (3) months if the tool is used
every day. Replace damaged or worn parts.

2. High wear parts are underlined in the parts list.
3. To keep downtime to a minimum, the following service

kits are recommended:

Tune-Up Kit for RP8250/8252/8253

2050521413 (Incl: 3, 5, 6, 15, 23, 26, 31, 34, 36, 37, 44, 48)

Repair Kit for RP8250

2050526333 (Incl: 3, 7B, 8, 9, 15, 23, 26, 31,34, 36, 37, 44, 48)

Repair Kit for RP8252