Operating Guidelines
Air Chicago (Standard/XW/XL/XXL)
3-4
3.2 Operating Controls
All operating controls are externally mounted
on the endframes and clearly marked with
functional names. References to these functions are
capitalized in this manual for easy identification.
Detailed descriptions are given in the following
paragraphs.
Controls at the front unit include (Figure 3-
6):
JAM ALARM (A)
START button (B)
STOP button (C)
INLET PAUSE ON/OFF switch (D)
STAIN/TEAR REJECT button (E)
ADVANCE CONVEYOR button (F)
JOG REVERSE button (G)
Safety STOP button (H)
Pacing Light (Option) (I)
•
•
•
•
•
•
•
•
•
JAM ALARM (A)
Sounds to indicate jams in the unit. It also
alerts operators to check the CHI Panel display
for diagnostic messages.
START button (B)
Initiates normal start-up and operation of the
unit. A green indicator lamp, located under the
switch surface, lights when the START button is
pushed. This indicates that power is connected
to the motors. The rotating parts associated with
primary fold operation begin to move. The control
logic will be active for the CHI panel settings.
STOP button (C)
Stops operation of the rotating and conveying
elements.
Figure 3-6: All operating controls for the unit are conveniently located on the front panel.
C D E
A
B
I
F
G
H
