Operating Guidelines
Air Chicago (Standard/XW/XL/XXL)
3-6
CHI Panel
The CHI panel (Figure 3-7) allows fully
automatic operation of the Air Chicago for a wide
range of folding needs. The Air Chicago can be
set to hold up to sixteen (16) programs.
NOTE:
The standard display is
the folder’s speed and the item
count.
The
ADJUST
button (A) is used for adjusting
various folding parameters and is
only
used when
the unit is operating in manual mode.
The
CD
programming button (B) is used to
change the preset program settings for the SIZE
SELECT buttons.
The
TEST
button (C) is used during
troubleshooting. The fold system must be
off (manual mode) in order to access the test
functions.
The CHI panel Display (D) varies depending
upon which mode is currently selected. It shows
the various fold system settings, diagnostic
messages, etc.
The
CURSOR
button (E) moves the cursor
to various positions in the CHI panel Display in
order to change settings.
The “
-
” and “
+
” buttons (F and G) are used
to increase and decrease the various fold system
settings. The “
-
” button is also used to reset the
item counter.
The
ENTER
button (H) confirms a selection
from a menu, or to store new information.
The
SIZE SELECT
buttons (I) place the unit
in automatic mode and are used to select one of
the up to 16 possible programs.
The
WIDTH
buttons (J) are used to manually
set the space between the primary fold skis. These
buttons are only used when the unit is operating
in manual mode.
The
AIR LO/HI
button (K) selects one of
two levels of air pressure to facilitate the primary
folding of different weights of items. Processing
lighter weight items requires less air pressure than
heavier items. This button is only used when the
unit is operating in manual mode.
The
CROSS
button (L) is used to select a
choice of crossfold patterns including half folds,
French (1/3) folds, or quarter folds. This button
is only used when the unit is operating in manual
mode.
Figure 3-7: The Chicago High Intelligence
(CHI) control panel.
A
B
C
D
E
F
G
H
I
J
K
L
