Caution
:
Refer to Fastener Caution.
5.
Install the bolts
(1) that attach the windshield frame to the front hinge pillar and tighten to
25
Y
(18
lb
ft)
.
6.
Clamp or mechanically fasten the windshield frame into place.
7.
Apply structural adhesive to bond the lower dash panel and lower plenum to the windshield frame. Refer to
Sheet Molded Compound (SMC) Panel
Bonding
.
8.
Drill holes and use close-end rivets to secure the lower plenum to the windshield frame while adhesive cures.
9.
Apply the structural adhesive to the area where the cross-car brace bonds to the center tunnel assembly. Refer to
Sheet Molded Compound (SMC)
Panel Bonding
.
10.
Install the cross-car brace to the vehicle.
11.
Install the cross-car brace bolts and tighten to
25
Y
(18
lb
ft)
.
12.
Install all hardware attaching the instrument panel (I/P) supports to the windshield frame.
13.
Apply a consistent bead of structural adhesive
(1) to the bonding surfaces to mate with the upper plenum. Refer to
Sheet Molded Compound (SMC)
Panel Bonding
.
