4.
Verify the fit of the outer lock pillar reinforcement.
5.
Clamp the outer lock pillar into position
Note:
Recommended wire alloy is 5554 and wire size is 0.035. The shielding gas is 100 percent Argon.
6.
Using a PULSED-MIG (P-MIG) or Resistance Welder, weld the lock pillar to the structure duplicating the factory welds
(1).
7.
Apply the sealers and the anti-corrosion materials to the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair
.
8.
Paint the repair area. Refer to
Basecoat/Clearcoat Paint Systems
.
9.
Install all related panels and components.
10.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
11.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
