5.
Remove the rear compartment frame
(1).
6.
Note the location of the adhesive and remove all remaining loose adhesive.
7.
Inspect the rear structure and frame rails for damage.
Installation Procedure
Note:
Shims may be necessary to achieve proper panel alignment. Use care to keep shims out of adhesive path.
1.
Before applying the adhesive, dry fit the rear compartment frame for proper fit and alignment.
2.
Clean and prepare all bonding mating surfaces according to the adhesive manufacturer's recommendations.
3.
Apply a consistent bead of structural adhesive
(1) 10
mm (3/8
in) in diameter to the rear structure in order to mate with the rear compartment frame.
Refer to
Sheet Molded Compound (SMC) Panel Bonding
.
