Note:
Recommend wire alloy is 5554 and wire size is 0.035. The shielding gas is 100 percent Argon.
A two minute cooling down period is recommend for every 2 minutes or 100
mm (4
in) of welding.
5.
Using a MIG welder, equipped with PULSE technology (P-MIG), weld
(1) the bumper bar to the frame rail ends duplicating the factory welds.
6.
Apply the sealers and anti-corrosion materials to the repair area. Refer to
Anti-Corrosion Treatment and Repair
.
7.
Paint the repair area. Refer to
Basecoat/Clearcoat Paint Systems
.
8.
Install all related panels and components.
9.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
10.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
