IDENTIFICATION
Figure 4.
The following is a list of controls and components on the Model B. Please take time to become
familiar with each item and its location. These terms will be used throughout the manual and knowing
them will aid in comprehension. Most of these terms will be shown in italics (
italics)
throughout the
manual.
MACHINE TERMS
1. Halfnuts lever
10. Micro feed handle
2. Power switch
11. Drilling milling clamp lever
3. Screw clutch lever
12. Tool post lock lever
4. Speed change lever
13. Machine vice handle
5. Clutch handle
14. Tailstock barrel clamp lever
6. The drilling milling unit
15. Transverse motion handle
up down handle
16. Tailstock barrel hand wheel
7. The unit lock lever
17.Tailstock lock lever
8. Drilling operating lever
18. Longitudinal motion handle
9. Clutch handle
19. Carriage lock lever
Chester UK Model B
4
