TAILSTOCK
The tailstock on the Model B is aligned with the headstock at the factory. However, we recommend that
you take the time to ensure that the tailstock is aligned to your desired tolerances. To align the tailstock:
1.
Centre drill a 6” long piece of round cold rolled stock on both ends. Set it aside for use in
step 4.
2.
Make a dead centre by turning a shoulder to make a shank. Flip the piece over in the chuck and turn a
60° point.
See Figure 34.
As long as it remains in the chuck, the point of your centre will be accurate to
your spindle axis. Keep in mind that the point will have to be refinished whenever it is removed and
returned to the chuck.
Figure 34.
Finished dead centre.
3.
Place a centre in your tailstock.
4.
Attach a lathe dog to the bar stock and mount it between the centres.
See Figure 35.
5.
Turn approximately .010° off of the diameter.
Figure 35.
Bar stock mounted on centres.
Chester UK Model B
22
