Chery Eastar, Руководство пользователя, Страница: 23 / 280

Instrument Panel
Steering signal indicator
There are indicator lamp, left turn and
indicator lamp, right turn. When the
indicator lamp, left turn or right turn is
turned on, the steering signal indicator
concerned will blink (relatively slow).
When hazard warning flasher is set on, the
indicator lamp, left turn, indicator lamp,
right turn, and left –and-right turn signal
indicator will blink simultaneously.
If a turn signal indicator blinks at a two
times normal rate, it is shown that the turn
light concerned has a fault.
Airbag warning indicator
( )
When ignition switch is turned on, fault
check indicator should be OFF after
blinking six times. If the fault indicator
lasts 6 seconds and is then OFF, it is
shown that some fault code exists though
it doesn’t affect regular work of the airbag
system.
If during running, the fault indicator is ON,
it is shown that there is a fault. Send the
car to Chery chartered service station for
system check.
Low engine oil pressure
warning indicator
When ignition switch is turned on, the
indicator should blink immediately, and
should be OFF after the engine is started.
If the indicator is not OFF after the engine
is started or blinks during running, please
stop the car immediately to quench the
engine and check the engine oil level.
If the oil level is over low, replenish oil
immediately.
Please turn to Chery
chartered service station
for check if engine oil is
consumed too quickly.
Power indicator
When ignition switch is turned on, the
indicator is ON. It should be OFF after the
engine is started.
If the indicator is not OFF or is ON during
running, stop the car immediately, shut off
the engine, and check dynamo belt.
If the dynamo belt is normal, please keep
on driving to Chery chartered service
station nearest for examination & repair
immediately.
However, accumulator
battery will keep continuous discharge
during running. Thereby, all unnecessary
electric appliances should be turned off,
including air conditioning system.
If dynamo belt has been damaged,
continuous driving should be suspended.
Ask professionals for examination &
repair.