Chery Eastar, Руководство пользователя, Страница: 183 / 280

Emergency Response
Beware of electric shock!
For a vehicle with xenon
headlight, bulb of headlight can‟t be
replaced
unless anode of
accumulator cell is dismounted.
Otherwise, you may get a high
tension electric shock.
Don’t touch upon bulb glass with you
fingers directly. Otherwise, the fingerprint
left thereon will be heated and volatile
after the lamp is ON to be deposited on
mirror surface and darken the reflector.
Use bulbs of the same type in replacement.
Prior to installation, please examine the
bulb specification.
It is suggested that a box of standby bulbs
be carried along with the car for accidental
conditions.
Chery chartered service
stations keep available bulbs of various
specs. For the purpose of safety, the
following bulbs of great importance to
traffic safety should be carried:
Bulb for front headlight:
12V 55W
Bulbs for steering,
reversing and rear fog
lamps:
12V 21W
Bulbs for license plate,
side steering and high
positioned brake lamps:
12V 5W
Bulbs for brake/parking
light:
12V 21W/ 5W
Bulb for front fog lamp:
12V 55W
Calibrate the head light each
time
when its bulb is
replaced.
Head light bank (high
beam/passing lamp/parking
light/turn light)
The head light bank must be dismounted
for dismounting of any bulb above.
1.
Open the power plant nacelle cover.
2.
Dismount the three screw bolts that
fasten the head light bank (with
positions as indicated below).