Chery Eastar, Руководство пользователя, Страница: 151 / 280

Driving
Engine RPM Limiter
Engine speed is limited by an electronic
device for engine protection.
Engine shutdown
Release the accelerator pedal. Turn off
ignition switch when engine speed is
reduced to the idle speed.
Don‟t step on the accelerator
pedal before the engine is
shut off.
Don’t shut off the engine immediately in
parking after running at high speed for
long. Make the engine operate for another
2 minutes at a rate higher than idle speed
to reduce the temperature gradually.
Notice:
When ignition switch is turned off and
the engine is shut off, the temperature is
still very high, and it takes about 10
minutes for electronic cooling fans of
radiator to operate continuously. Even
if the cooling fans stop operations, they
may operate again all of a sudden due
to high temperature. Thereby, be
particularly careful when working
beside the engine.
Brake
Double loop braking system
Your car is equipped with a diagonal
double-loop braking system. If one loop
fails, the other loop still keeps working
effectively.
When one braking loop fails,
it costs a lot of efforts to step
on the braking pedal, and
the parking distance is also
prolonged. In such a case, please
head
to Chery chartered
maintenance point for inspection &
repair and then continue your
journey.
Brake fluid
If the warning indicator for the braking
system is not OFF when hand brake is
released, it indicates that the level of brake
fluid is too low.
Check height of brake fluid level on a
scheduled basis, as required.
Add brake fluid immediately to
keep the fluid level with the
mark of MAX. Send your car
to Chery chartered maintenance point
for inspection of the braking system.