Chery Eastar, Руководство пользователя, Страница: 212 / 280

Emergency Response
1.
Park two cars appropriately to make
them not touch each other.
2.
Turn off ignitions of both vehicles.
Turn off all unnecessary electrical
devices.
3.
Connect the positive (
﹢
) post of the
accumulator cell short of power to that
of supporting accumulator cell via
conductor A.
4.
Connect one end of conductor B to the
negative (
-
) post of supporting
accumulator cell and the other end of
conductor B to the metallic part of the
engine to be started.
To be connected to the
negative (
-
) post of the
accumulator cell short of
power is forbidden.
5.
Confirm that jumper cable won’t
interfere with operating parts of the
engine.
To start the engine
In order to reduce voltage
surge in dismounting, put
through the fan and electric
heating switch (rear windshield),
please.
Don‟t illuminate the head
light to replace heating-type
windshield
glass. Voltage
surge may damage bulbs.
1.
Engine of the vehicle with supporting
accumulator cell runs at a high speed
appropriate.
2.
Start up the engine of the vehicle with
an accumulator cell short of power.
3.
Run the two cars for 3 minutes before
lead wires are removed.
Lead wire removal

Remove the conductor B (
﹣
) firstly
and then the conductor A (
﹢
).