Chery Eastar, Руководство пользователя, Страница: 223 / 280

Servicing & Maintenance
Engine Oil Dipstick
Engine oil consumption is influenced by
multiple factors. A new engine usually
reaches normal oil consumption around
5,000 km. Engines in high load operation
consume much more oil than usual.
Regularly check engine oil when making
new additions or prior to long distance
driving.
Drive and park your car on flat ground
when checking engine oil; turn off ignition
switch and wait for several minutes for
engine oil to flow into oil sump (as
temperature outside car may happen to be
unusually low or engine temperature needs
more time to reach operating level). Prior to
engine oil check, do not start engine. Draw
out dipstick and wipe the same clean with
lint free cloth, restore to its position and
draw out again.
In case of oil level between MIN mark and
MAX mark at the lower end of dipstick, oil
filling is unnecessary. Hot engine oil may
expand and exceed by several millimeters
the above gap marks.
In case of oil level at or below MIN mark,
add engine oil qualified for Chery
designated specs till oil level rises to stay
between MIN and MAX. For details, refer
to ―Capacity and Specs‖.
Engine Oil Filler Cap
Turn filler cap in anticlockwise direction
and draw the same out to open the same. Do
not open filler cap when engine is running.
Do not use oil additive or
engine treating agent, which
are unnecessary and may
cause damages to engine, which is
not covered by warranty promise.
Turn filler cap clockwise until you hear a
cracking sound to close the same.
Empty waste engine oil containers
shall not be discarded together
with domestic refuse. Please resort
to eligible local waste disposal facilities to
discard the containers.
Braking Liquid/Clutch Oil
Take care to avoid contact
between human skin and
eyes with the liquid; in case
of such contact, please wash the
affected parts with water and
immediately
resort to medical
treatment.
MAX MIN
(Mitsubishi Engine)
MAX MIN
(ACTECO Engine)
(Mitsubishi Engine) (ACTECO Engine)