Chery Eastar, Руководство пользователя, Страница: 187 / 280

Emergency Response
2. Pull out the light holder and take down
the bulb damaged.
3.
Install a new bulb into the holder and
install the holder into place.
4.
Fasten the holder with the tapping
screws.
Bulb for interior front/rear
ceiling light
1. Turn off body light.
2.
Insert screwdriver between lamp shell
and lamp house to pry out the lamp
house carefully.
3.
Replace the bulb and keep reflecting
mirror in place.
4.
Install the lamp shell into mounting
hole of the lamp house again.
Visor dressing glass lamp:
It’s positioned behind the visor.
Pry out the glass block and replace the
bulb.
Bulb for luggage
compartment
Mounted position: Installed on the veil of
left rear loudspeaker.
1.
Extrude the position of A with your
hand from back of the lamp; and cross
the protruding step to dismount the
lamp for luggage compartment.
2.
Replace the bulb.
3.
Install it into the mounting hole on the
veil of loudspeaker.
Front headlight beam
adjustment
Front headlight beam adjustment involves
driving
safety. Thereby, special
instruments are allowed for beam
adjustment only. Comply with relevant
laws & regulations in adjustment.
Position of front headlight must adapt to
load conditions of the vehicle.
Screw A - Vertical adjustments
Screw B - Horizontal adjustment
Indicated above is the screw for right
headlight adjustment. Take down the
protective
cover of headlight in
adjustment.
The screw for left front headlight
adjustment is symmetrical with that for
right headlight. The adjustment methods
keep the same.
Fuse and Relay
Turn off ignition switch and
all
electrical equipment
before fuse and relay are
replaced.
Replace the defective fuse with a new fuse
of the same rated value. The fuse box
including primary fuse and relay is
positioned as below.
Replacement of relay requires professional
knowledge.