1 Operational Manual
05/02/03
199
EJECTOR SETTING
????.?
mm
FORE 1 FORE 2
SPEED % AA DD
PRSEEURE % BB EE
POSTION mm CCC.C FFF.F
BACK 2 BACK 1
JJ GG SPEED %
KK HH PRSEEURE %
LLL.L III.I POSTION mm
NUMBER OF EJECTION : NNNNN
EJECTION MODE : MMMMMMMMMMM VIBRATION EJECTION COUNT : PPPPP
EJECT-OUT INTERMISSION : OOOO.Os
EJECTION DURING MOLD OPENING : Ｔ MOLD OPENING POSTION AT : QQQQ.Qmm
SPARE EJECTOR FORWARD POSTION : RRR.Rmm
SPARE EJECTOR BACKWARD POSTION: SSS.Smm
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
Menu05
4.3.2. Method of operation:
(A)
In auto or semi-auto mold-opening, ejector advanced to “FFF.F”, and come back to 1 “III.I”,
immediately the ending position will cause ejector to advance, such cyclic operation should
be done “PPPPP” times, then ejector will come back to “LLL.L”. This kind of operation
method we count it once.
(B)
If ejector amount (NNNNN) is set twice, above operation will perform twice. Refer to the
flow chart above.
In the ejector vibrating function, the directional value of hydraulic circuit must be corrected,
after the correction the ejector non-return function can’t be used. (After ejector has
advanced, ejector stops DD.D “setting time then let the ejector go back).
