1 Operational Manual
O) AAAAAAAAAAAAA: Auto shut-off function. Either press
or
to make
a pick among following four modes, and push
to complete the selection.
Code descriptions for function selections are as follows:
L.a) Auto shut-off function off.
L.b) Hydraulic pump off: This is applied when abnormal conditions occur.
L.c) Heater Off: Heater off when abnormal conditions occur.
L.d) Hydraulic Pump and Heater Off: Both hydraulic pump and heater should be
off during abnormal conditions.
2.40.2 Function Selection Setup for High-Pressure Cylinder
FUNCTION SETTING MODE
FUNCTION SETTING SELECT
PHOTO CELL FUNCTION•••••••••••••• ＢＢＢ
ACCUMLATOR INJECTION ••••••••••••• ＣＣＣ
HYDRAULIC MOLD CLAMPER •••••••••••• ＤＤＤ
THERMOSET MOLD HIGH-PRESSURE DEGAS •••••• ＥＥＥ
THERMOSET MOLD OPEN DEGAS••••••••••• ＦＦＦ
AUTO. MOLD EXCHANGE•••••••••••••• ＧＧＧ
MULTI MOLD OPENING FUNCTION ••••••••• ＨＨＨ
EXTRUSION••••••••••••••••••• ＩＩＩ
SPARE 2 ••••••••••••••••••• ＪＪＪ
SPARE 3 ••••••••••••••••••• ＫＫＫ
SPARE 4 ••••••••••••••••••• ＬＬＬ
AUTOMATIC SHUT-OFF FUNCTION•••••••••• AAAAAAAAAAAAA
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
Menu 32
Move cursor to set parameter. Push
to “open” or
to “close”and push
to complete
a correction. Code descriptions for menu 32 is as follows:
A) BBB: Photo-cell function
B) CCC: Spare
04/08/13
130
