ChefLine CHABB23T, Инструкция по эксплуатации

Страница: 7 / 147

P2M066STD-Ver1.0 6
GB
Location and Installation

Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces. To prevent injury or damage to the unit, we recommend that the
appliance should be unpacked and set up by two people.

The climatic class can be found on the rating plate. It specifies the ambient temperatures at which the
appliance may be operated. The rating plate can be found behind the appliance.
Climate Class Max. Ambient Temperature Relative Humidity
3 25 60%
4 30 55%
5 40 40%

Maintain a distance of 10 cm between the appliance and walls or other objects for ventilation. Increase
this distance if the appliance is near an a heat source.

The appliance should be placed on a solid flat and stable floor to reduce noise and vibration. Level the
appliance by adjusting the feet.

Avoid locating the unit in direct sunlight or near heat sources such as ovens or radiators.

Please make sure the appliance is properly ventilated.

Check that the power supply and voltage used comply with the details on the rating plate. The plug
must be accessible after installation.

Correctly connect and disconnect the plug. When inserting ensure the plug is fully engaged. While
unplugging hold the body of the plug. Never pull the supply cord directly.

Is advisable to install a bipolar switch with a NC contact (Normal Close) for the wire section at least
3 mm. between socket and the appliance. This switch is mandatory when the load exceeds 1000
watts or when the blast chiller is connected directly without plug. The thermal-braker switch must
be placed near the blast chiller so that it can be clearly visible by the technician in case of
maintenance.

Blast chiller is equipped with a built-in refrigeration engine, is necessary to avoid obstruct the air
circulation of the unit in correspondence at front grille, in this way it will allow a correct air
exchange. Avoid depositing products or other materials on the perimeter of the blast chiller.
Remember that a rise of ambient temperature or insufficient air to the condenser of the
refrigeration unit, reduce the performance of the blast chiller with possible deterioration of the
products and with more energy consumption.

If the unit is to be shut down for long period, switch it off and disconnect the plug from socket outlet.
Clean the appliance and leave the door open to prevent odour.

Important! For your personal safety, this appliance must be properly grounded (earthed). This
appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be
inserted into an outlet that is properly grounded and installed. Consult a qualified electrician or service
centre if you do not completely understand the grounding instructions. If doubt exits whether the
appliance is properly grounded, have a qualified electrician check the circuit to make sure the outlet is
properly grounded.