ChefLine CHABB23T, Инструкция по эксплуатации

Страница: 14 / 147

13 P2M066STD-Ver1.0
GB
Operation
Freezing cycles (Temperature and time controlled)
Operate as follows to start the Temperature or Time freezing cycle:
The Blast Freezing cycle is split in the following 2 phases:

Blast Freezing

Storage mode
These cycles are used when the end user wants a smooth freezing process
1. To select “TEMPERATURE controlled cycle” press and release key to select the cycle
until the display will show the label “
-18 ”: the set led icon; compressor led icon
and “Celsius degree” led icon will be ON.
2. To select “TIME controlled cycle” press and release key to select the cycle until the
display will show the label “
280 ”: the set led icon and compressor led icon only
will be ON .
3. Press and release START/STOP key to start temperature freezing cycle: the
Compressor/Fans LED icons + will switch
ON permanently; and the icon start
flashing. On the display will appear the message “ CHILL ” every 1 minute and the value of
needle probe “ Pb2” at that moment (for Temperature cycle) or the time left to finish the
cycle plus chamber temperature probe “ Pb1” value (for Time cycle).
4. Once the needle probe temperature reaches the pre-setting point or time cycle is ending,
a visual and acustic alarm will notify the ending cycle, the unit will start a storage cycle
and led icon will flashing.
Note : During the storage mode the display will show chamber temperature “Pb1” .
Alarm icon/Alarm displayed labels:
- When there are one or more than one alarm events, it or them must be visible on the
display by label and by LED icon and buzzer will be
ON (Acoustic alarm)
- Whatever button will be pushed, the buzzer will be switched OFF , but the alarm icon and
label will be still visible.
- The alarm icon and labels will be visible until the user will check and acknowledge the
alarm situation.