CHD 8-427, Руководство по установке

Страница: 16 / 16

Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface
P6 P6 P6 P6----M M M M Installation Installation Installation Installation Manual Manual Manual Manual
8 88 8----427 / v. 1.00 427 / v. 1.00 427 / v. 1.00 427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
16
16 16
16
Fig. 3.2.2 Fig. 3.2.2 Fig. 3.2.2 Fig. 3.2.2
For the reset button only installation, cut-off red, green and yellow wires of the bunched cables as shown on fig.
3.2.3 and remove the indication LED. If the indication LED is not installed, the interface operation is unaffected.
The only limitation is that you cannot see actual status of the interface (the “Indicator Mode” patch parameter
remains unsignificant - see user manual of the interface).
Fig. 3.2.3 Fig. 3.2.3 Fig. 3.2.3 Fig. 3.2.3
3.3 3.3 3.3 3.3 MEMORY PROTECTION MEMORY PROTECTION MEMORY PROTECTION MEMORY PROTECTION
Fig. 3.3.1 Fig. 3.3.1 Fig. 3.3.1 Fig. 3.3.1
All user data stored in interface memory can be
protected against unwanted rewriting after the
memory is filled with your own data.
The jumper from interface accessory have to be
plugged on pin header (labeled “MEM
MEM MEM
MEM”) on the
interface board (see fig. 3.3.1) if you want to activate
the memory protection (see the Owner’s Manual of
the interface for details).
All documents and
All documents and All documents and
All documents and support software are available at manufacturer’s web pages.
support software are available at manufacturer’s web pages. support software are available at manufacturer’s web pages.
support software are available at manufacturer’s web pages.
Korg Polysix MIDI Interface
Model P6-M, Nr. 8-427, ver. 1.00
Document: 842710_instal, rev. 1
Manufacturer: CHD Elektroservis, Czech Republic
www.chd-el.cz info@chd-el.cz