CHD 8-427, Руководство по установке

Страница: 8 / 16

Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface Korg Polysix MIDI Interface
P6 P6 P6 P6----M M M M Installation Installation Installation Installation Manual Manual Manual Manual
8 88 8----427 / v. 1.00 427 / v. 1.00 427 / v. 1.00 427 / v. 1.00
Copyright © 2021 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
8
88
8
2.3.2 2.3.2 2.3.2 2.3.2 RESET BUTTON AND INDICATION LED MOUNTING RESET BUTTON AND INDICATION LED MOUNTING RESET BUTTON AND INDICATION LED MOUNTING RESET BUTTON AND INDICATION LED MOUNTING
a) Insert LED holder (from the interface accessory) into 6,5 mm hole in the instrument’s panel from the outer
side. Pull the lock ring of the LED holder over the supplied LED. Then insert the LED into the holder (from inner
side of the instrument’s panel) and fix it by the overthrust of the ring on the holder (fig. 2.3.3, 2.3.4).
b) Insert the reset button into 7 mm hole in the instrument’s panel from inner side. Fix the button to the panel
with the nut and spring washer (fig. 2.3.3, 2.3.4).
Fig. 2.3.3 Fig. 2.3.3 Fig. 2.3.3 Fig. 2.3.3 Fig. 2.3.4 Fig. 2.3.4 Fig. 2.3.4 Fig. 2.3.4
2.4
2.4 2.4
2.4 20
20 20
20----CORE RIBBON CABLE MOUNTING
CORE RIBBON CABLE MOUNTING CORE RIBBON CABLE MOUNTING
CORE RIBBON CABLE MOUNTING
The delivered 20-core ribbon cable is fitted with 20-pin connector (fig. 2.4.1). It must be connected to several
pads at the KLM-371 board of the instrument (fig. 2.4.2). Note that the KLM-371 board is divided to three parts.
Fig. 2.4.1
Fig. 2.4.1 Fig. 2.4.1
Fig. 2.4.1
Fig. 2.4.2 Fig. 2.4.2 Fig. 2.4.2 Fig. 2.4.2