Instructions for installation and use. Reproduction prohibited. 07/ 2010 version 2.0 TAM
17
3.5.3.2.13
Position it at the level of the screw holes
.
3.5.3.2.14
Cut 3cm of the flat gasket located on the bottom plate at the same
level as the motor is connected
.
3
.5.3.2.15
Unscrew the screw holding the plaquette on the bottom plate and
push it to the right, opening the orifice for the sensor cable
.
3.
5.3.2.16 Remove the sensor cable
.
3.5.3.2.17
Run the cable through the hole in the bottom plate, close the plaquette
and rescrew it.
