3
Vectra Genisys® Laser Module
TABLE OF CONTENTS
Vectra Genisys® Laser Module
ABOUT LASER LIGHT THERAPY
Precautionary Instructions
The precautionary instructions found in this section and throughout this
manual are indicated by specific symbols. Understand these symbols and their
definitions before operating this equipment. The definition of these symbols
are as follows:
=CAUTION-
Text with a “CAUTION” indicator will explain possible
safety infractions that could have the potential to
cause minor to moderate injury or damage to
equipment.
=WARNING-
Text with a “WARNING” indicator will explain possible
safety infractions that will potentially cause serious
injury and equipment damage.
=DANGER-
Text with a “DANGER” indicator will explain possible
safety infractions that are imminently hazardous
situations that would result in death or serious injury.
NOTE:
Throughout this manual “NOTE” may be found. These Notes are
helpful information to aid in the particular area or function being
described.
Read, understand, and practice the precautionary and operating
instructions. Know the limitations and hazards associated with using any
laser device. Observe the precautionary and operational decals placed
on the unit.
Do not operate this unit when connected to any unit other than
Chattanooga Group devices.
Do not operate this unit in an environment where other devices
are being used that intentionally radiate electromagnetic energy
in an unshielded manner. Portable and mobile RF communications
equipment can affect Medical Electrical Equipment.
DO NOT use sharp objects such as a pencil point or ballpoint pen to
operate the buttons on the Operator Interface as damage may result.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous exposure to laser light
energy.
Handle the applicator with care. Inappropriate handling of the
applicator may adversely affect its characteristics.
Inspect applicator cables and associated connectors before each use.
This unit should be operated in temperatures between 59 to 85°F (15
to 40°C), and transported and stored in temperatures between - 20 to
110°F (7 to 43°C), with relative humidity ranging from 30% - 60%.
DO NOT disassemble, modify, or remodel the unit or accessories. This
may cause unit damage, malfunction, electrical shock, fire, or personal
injury.
Failure to use and maintain the Vectra Genisys Laser Module and its
accessories in accordance with the instructions outlined in this manual
will invalidate your warranty.
•
•
•
•
•
•
•
•
•
•
CAUTION
