CHART MVE Fusion Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 51

CHART MVE Fusion Скачать руководство пользователя страница 2

20994124 REV A



2

MVE FUSION

Technical Manual

PN

20994124

Rev A

1

Preface

Chart Inc.

2200 Airport Industrial Drive, Suite 500

Ball Ground, GA 30107 USA

Customer / Technical Service:

The Americas

Phone: (800) 482-2473

Fax: (888) 932-2473

(770) 721-7759

(770) 721-7758

Email: [email protected]

Asia, Australia, Pacific Rim

Phone: +61 (2) 974 94333

Fax: +61 (2) 974 94666

Europe

Phone: +44 (0) 1344 403100

Fax: +44 (0) 1344 429224

This manual covers the use and maintenance of MVE Fusion Freezers. READ BEFORE USING THIS EQUIPMENT.
Failure to follow the instructions in this manual can result in damage to the unit, injury to personnel, and/or poor
equipment performance. It is intended for use by trained personnel only. All service and maintenance should be
performed by an authorized MVE Distributor or Service Technician.

NOTE: All MVE Fusion models are Class I per IEC 61140, as the AC electrical supply requires a protective earth

ground.  These  devices  are  externally  powered  and  intended  for  continuous  operation.  The  models  are
intended  for  professional  use  in  research,  while  the  medical  device  versions  are  intended  to  be  used  in
situations that directly support medical applications. They are not suitable for use with flammable anesthetics.
These  devices  have  been  tested  to,  and  are  in  compliance  with

UL 61010-1:2012 Ed.3 & CSA

C22.2#61010-1:2012 Ed.3 +G1

.

«
1
2
3
4
...
»

Содержание MVE Fusion




















































Отзывы:

Нет отзывов