Chandler Engineering AMETEK 7200, Инструкция по эксплуатации

Страница: 6 / 77

P - 2 PREFACE
Specifications
Operating Conditions
Input Voltage: 208 – 230 VAC
Input Current: 11A
Frequency: 50 / 60 Hz, 1 PHASE
Max. Working Temperature: 325°F (163°C)
Min. Working Temperature: 34°F (1°C)
Operating Pressures
Cement Sample: Max. 1000 psig (6.895 MPa, 68.95 bar, 68.05 atm.)
(Gas Injection Pressure, H
2
O Confining Pressure, and
Pore Pressure)
Gas (N
2
) Inlet: Max. 3000 psig (20.685 MPa, 206.85 bar, 204.14 atm.)
Min. = whatever max. pressure is required by your test
H
2
O Inlet: Max. 160 psig (1.103 MPa, 11.03 bar, 10.89 atm.)
Min. 20 psig (0.138 MPa, 138 kPa, 1.38 bar, 1.36 atm.)
Air Supply Inlet: Max. 160 psig (1.103 MPa, 11.03 bar, 10.89 atm.)
Min. 20 psig (0.138 MPa, 138 kPa, 1.38 bar, 1.36 atm.)
Measurement Accuracy: 0.2 % of Full Scale (± 2 psi)
Measurement Resolution: 0.25 psi (0.1 psi resolution displayed & logged)
Control Accuracy: ±10 – 20 psi (70 – 140 kPa) approximately
Cell Volumes (approximate:)
CHA (cement sample): 417 cc
H
2
O Accumulator: 100 cc
Cement Temperature & Cabinet Temperature:
Measurement Accuracy: ± 0.5°C
Measurement Resolution: 0.1°C
Oven Temperature:
Measurement Accuracy: ± 1°C
Measurement Resolution: 0.1°C
Temperature Uniformity
(between different locations
within oven):
± 3°C at 150°C
Temperature Control Stability: ± 0.5°C