Chandler Engineering AMETEK 7200, Инструкция по эксплуатации

Страница: 20 / 77

2-6 SECTION 2 – OPERATING INSTRUCTIONS
Once the file is selected, the system will begin logging every measured and calculated data
value at the time intervals specified in the
Data Log Rate window. The Elapsed Log Time
appears on the main window when data logging is active.
When
Manual mode is selected, the User Comment control appears (See Figure 3), and data
is logged only when the blue Log Data button is clicked. This window allows the user to add
comments about the test to the data file. The User Comment is saved to the log file along
with the corresponding data points.
Figure 3 - Main Screen while Manual Data Logging, with User Comment window
Exit
This menu item closes the CHA-Control software.
Operation menu
Online mode
Choose this menu item to communicate with and operate the CHA, and run a Cement
Hydration Test.
Simulation mode
Choose this menu item to operate the software, for training and familiarization purposes,
without being in communication with the CHA (or even having the CHA present).