3
5
of 42
Doc 01-20099
Rev
F
INSIDE/OUTSIDE INTERRUPT LOOP DETECTOR (TB16)
IF GATE TYPE IS
SWING
OR
LINEAR
(ATG IS NOT FUNCTIONAL):
Inside Interrupt Loop:
Activation stops an opening or closing gate and deactivation opens the
gate.
Outside Interrupt Loop:
Activation opens a closing gate.
IF GATE TYPE IS
SLIDE
OR
BARRIER
AND ATG IS DISABLED:
Inside Interrupt Loop:
Activation opens a closing gate.
Outside Interrupt Loop:
Activation opens a closing gate.
IF GATE TYPE IS
SLIDE
OR
BARRIER
AND ATG IS ENABLED:
Inside Interrupt Loop:
Activation/deactivation closes an opening gate. Activation stops a
closing gate and deactivation closes the gate.
Outside Interrupt Loop:
Activation stops a closing gate and deactivation closes the gate.
INSIDE/OUTSIDE PHOTO-SENSOR (TB3)
IF GATE TYPE IS
SWING
OR
LINEAR
:
Inside Photo Sensor:
Activation stops a moving gate and deactivation restarts the gate.
Outside Photo Sensor:
Activation stops a closing gate and deactivation restarts the gate.
IF GATE TYPE IS
SLIDE
OR
BARRIER
:
Inside Photo Sensor:
Activation stops an opening gate and deactivation restarts the gate.
Outside Photo Sensor:
Activation stops a closing gate and deactivation restarts the gate.
INTERRUPT BAR INPUTS (TB11)
INTERRUPT BAR Activation causes gate to stop and reverse a few inches.
INS./OUTS. INT. SENSE / SHADOW SENSE / EXIT SENSE (TB12/TB13/TB14/TB15)
INPUTS
INSIDE
Input from an Inside Interrupt loop provides the signal for an
INTERRUPT
optional LiftMaster loop detector add-on board. Operation is the
SENSE
same as the Interrupt Loop input, above.
OUTSIDE
Input from an Outside Interrupt loop provides the signal for an
INTERRUPT
optional LiftMaster loop detector add-on board. Operation is the
SENSE
same as the Interrupt Loop input, above.
SHADOW
Input from shadow loop provides signal for optional LiftMaster
SENSE
loop detector add-on board. Operation is the same as Shadow
Loop input, above.
