Chamberlain Elite EL Series, Руководство по программированию

Страница: 33 / 80

1 2 3
Directory Code "33" is Activated on February 1st, 2004 at 6PM.
Example:
Year Month Day
24-Hour Time
4 5
4A
4B
5B 5A
Page 32
Director
y Codes
Director
y Codes
Add / Modify Resident DnD and/or Call Forwarding
Add/Modify DnD and Call Forwarding Information for the Resident (NPB) or manager. Do Not
Disturb (DnD) Schedules prevent visitors from calling the Resident (NPB) or manager phone
during specified time frames. Call Forwarding redirects visitor calls to an outside telephone number
instead of ringing the Resident (NPB) or manager phone. During a Call Forwarding call, the visitor
will hear normal telephone line sounds but will not hear the number being dialed.
You can Enable or Disable, individually, the DnD and Call Forwarding features for the Resident
(NPB) or manager phone.
Factory Setting: DnD Control Setting is Disabled (0); Call Forwarding
Control Setting is Disabled.
Press Then
Set DnD Control Setting, Enabled ( 1 ) or
Disabled ( 0 ). Then (#).
Enter Do Not Disturb Schedule (0-63).
Then (#).
Set Call Forward Control Setting, Enabled (
1 )
or Disabled ( 0 ). Then (#)
Enter Call Forward Schedule (0-63). Then (#)
5
49
Activate or Deactivate a Directory Code
45
Activate or deactivate Directory Codes. Also activate or deactivate specific dates and times for
those Directory Codes.
4
Only Enter New Call Forward Phone Number (up to
20 digits). Then (#)
(Skip this step to keep existing Call Forward Phone
Number)
Enter Call Forward Phone Extension (up to 5 digits).
Then (#)
(If using an extension the unit
MUST have a phone
number).
Enter Call Forward Extension Delay (0-30 sec.). Then (#)
6
6A
Activate / Deactivate a Directory Code:
Press Then
Enter Directory Code (1-4 digits). Then (#)
Activate Directory Code, (Enable-1 or Disable-0). Then (#)
Use Start Activation Date, (Enable-1 or Disable-0). Then (#)
7
7 6A 6 5 4 3 2
Example:
1
The DnD Control Setting is Enabled and uses Schedule "34". It also Enables Call Forwarding which uses Schedule "22".
Call Forwarding uses Phone Number "976-5000" with Extension "1136" and waits "20" seconds before dialing the
Extension.
To Activate or Deactivate a Directory Code:
Start Date (yymmdd). Then (#)
Start Time (hhmm). Then (#)
Use End Deactivation Date, (Enable-1 or
Disable-0). Then (#)
End Date (yymmdd). Then (#)
End Time (hhmm). Then (#)
4A
4
4B
5
5A
5B
NOTE: All time must be entered using a
24-hour format (8AM=0800, 3PM=1500 etc.)
1
Disabling the Activate Directory Code 3 , the Directory Code will always be deactivated. If you enable the Activate
Directory Code 3 , then the four If statements could apply:
1. If you disable the Start Activation Date 4 and disable the End Deactivation Date 5 and omit all dates and times, the
Directory Code will immediately become active and stay that way until the code is deactivated or deleted.
2. If you enable the Start Activation Date 4 and add only a "Start Date and Time" 4A 4B and disable the End Deactivation
Date 5 , the Directory Code will activate on that "Start Date and Time".
3. If you disable the Start Activation Date 4 and enable the End Deactivation Date 5 and add only an "End Date and Time"
5A 5B , the Directory Code will deactivate on that "End Date and Time".
4. If you enable the Start Activation Date 4 and add a "Start Date and Time" 4A 4B enable the End Deactivation Date 5
and add an "End Date and Time" 5A 5B , the Directory Code will activate on that "Start Date and Time" and deactivate
on the "End Date and Time".
1
2
3
2
3