Chamberlain Elite EL Series, Руководство по программированию

Страница: 69 / 80

Page 68
Direct Commands From The Phone
Direct Commands From The Phone
Direct Commands from Your Phone:
121
Press from the residence phone. The unit is now prepared to accept a direct
command.
Enter the Unit ID code (if applicable).
Select one of the following options:
Direct command allows you to control the unit from the residence phone.
122
Open & Close Door:
Press Then
Cycles relay. Typically used to momentarily open a
door/gate for a visitor without having the visitor initiate a
call.
1
2
Toggle Door Open/Close Until:
Press Then
Activate or deactivate the door’s relay group until a
specified time of day. If the door is currently latched
open or in the unlock position of an automatic time
zone then step
122 will latch the door closed and vice
versa.
3
ABC
ABC ABC
4
Select the Door (1-4) that you want to control. Press . NOTE: If no door is selected
then Door 1 is used.
5
ONLY for step #2 sections Toggle Door Open/Close Until and Get Door Status -
Enter the Latch Time (hhmm=Hour and Minute). Then .
120
Speaking Through the Unit (Intercom Mode):
Press Then
Used to initiate communications from the resident
phone through the unit at any time.
ABC
Press from the residence phone. The unit is now prepared to accept a direct
command.
Enter the Unit ID code (if applicable).
Select one of the following options:
1
2
3
Press from the residence phone. The unit is now prepared to accept a direct
command.
Enter the Unit ID code (if applicable).
Select one of the following options:
1
2
3
4
Select the Door (1-4) that you want to control. Press . NOTE: If no door is selected
then Door 1 is used.