Chamberlain Elite EL Series Скачать руководство пользователя страница 39

Страница: 39 / 80

Entr

y Codes

Entr

y Codes

Activate or Deactivate an Entry Code

This allows you to activate or deactivate an Entry Code, also on a specific date and time.

Page 38

Delete ALL Entry Codes:

202

Press Then

Enter Then

This will delete

ALL

Entry Codes from unit.

Important:

Once you delete the Entry Codes, you cannot retrieve them unless they are saved

in Versa XS.

Verify an Entry Code

Activate / Deactivate an Entry Code:

Press Then

Enter Entry Code (3-9 digits). Then (#)
Activate Entry Code, (Enable-1 or Disable-0). Then (#)

Use Start Activation Date, (Enable-1 or Disable-0). Then (#)

To Activate or Deactivate an Entry Code:

Start Date (yymmdd). Then (#)
Start Time (hhmm). Then (#)

Use End Deactivation Date, (Enable-1 or
Disable-0). Then (#)

End Date (yymmdd). Then (#)
End Time (hhmm). Then (#)

NOTE:

All time must be entered using a

24-hour format

(8AM=0800, 3PM=1500 etc.)

Verify that an Entry Code exists in the unit’s database.

Press Then

Enter Entry Code (3-9 digits). Then (#)

If you make an error during an entry, press the asterisk key (*) to begin again.

Audio Feedback "Invalid Step":

Indicates the code

Does Not

exist in the database.

Audio Feedback "Valid Step":

Indicates the code

Exists

in the database.

Disabling the Activate Entry Code

, the Entry Code will always be deactivated. If you enable the Activate Entry Code

, then the four

statements could apply:

you disable the Start Activation Date

and disable the End Deactivation Date

and omit all dates and times, the

Entry Code will immediately become

active

and stay that way until the code is deactivated or deleted.

you enable the Start Activation Date

and add only a "Start Date and Time"

4A 4B

and disable the End Deactivation

Date

, the Entry Code will

activate

on that "Start Date and Time".

you disable the Start Activation Date

and enable the End Deactivation Date

and add only an "End Date and Time"

5A 5B

, the Entry Code will

deactivate

on that "End Date and Time".

you enable the Start Activation Date

and add a "Start Date and Time"

4A 4B

enable the End Deactivation Date

and add an "End Date and Time"

5A 5B

, the Entry Code will

activate

on that "Start Date and Time" and

deactivate

the "End Date and Time".

Содержание Elite EL Series















































































Результаты поиска

Содержание Elite EL Series

Отзывы:

Похожие инструкции для Elite EL Series

Бренды по названию

Популярные бренды

Chamberlain Elite EL Series, Руководство по программированию

Результаты поиска

Содержание Elite EL Series

Отзывы:

Похожие инструкции для Elite EL Series

Бренды по названию

Популярные бренды