)NSTALL THE 0ROTECTOR 3YSTEM
/04)/. " 02%7)2%$ ).34!,,!4)/.
#UT THE END OF THE SAFETY REVERSING SENSOR WIRE MAKING SURE THERE IS ENOUGH WIRE
TO REACH THE PREINSTALLED WIRES FROM THE WALL
3EPARATE THE SAFETY REVERSING SENSOR WIRES AND STRIP INCH MM OF
INSULATION FROM EACH END #HOOSE TWO OF THE PREINSTALLED WIRES AND STRIP
INCH MM OF INSULATION FROM EACH END -AKE SURE THAT YOU CHOOSE THE SAME
COLOR PREINSTALLED WIRES FOR EACH SENSOR
#ONNECT THE PREINSTALLED WIRES TO THE SENSOR WIRES WITH WIRE NUTS MAKING SURE
THE COLORS CORRESPOND FOR EACH SENSOR &OR EXAMPLE THE WHITE WIRE WOULD
CONNECT TO THE YELLOW WIRE AND THE WHITEBLACK WIRE WOULD CONNECT TO THE PURPLE
WIRE
!T THE GARAGE DOOR OPENER STRIP INCH MM OF INSULATION FROM EACH END
OF THE WIRES PREVIOUSLY CHOSEN FOR THE SAFETY REVERSING SENSORS 4WIST THE LIKE
COLORED WIRES TOGETHER
)NSERT THE WIRES CONNECTED TO THE WHITE SAFETY SENSOR WIRES TO THE WHITE TERMINAL
ON THE GARAGE DOOR OPENER )NSERT THE WIRES THAT ARE CONNECTED TO THE WHITEBLACK
SAFETY SENSOR WIRES TO THE GREY TERMINAL ON THE GARAGE DOOR OPENER
Safety reversing
sensor wires
Pre-installed
wires
White
White/Black
Yellow (for example)
Purple (for example)
Not Provided
Pre-installed wires
Safety reversing
sensor wires
7/16"
(11 mm)
Yellow
Purple
1
3
4
7/16"
(11 mm)
2
Yellow
(for example)
Purple
(for example)
To insert or remove the wires from
the terminal, push in the tab with a
screwdriver tip.
5
RED
WHITE
WHITE
GREY
D
RED
W
RE
WHI
WHITE
G
GREY
