Challenger MT700 Series, Руководство по обслуживанию, Страница: 6 / 51

79023976 B Rev. 1
Introduction
INTRODUCTION
SERVICE MANUAL
This Service Manual is for all Challenger® MT700 Series
and MT700B Series rubber track tractors. CE and
Non-CE versions are included.
This service manual has been prepared with the latest
service information available at the time of publication.
Read the service manual carefully before doing any
service on the machine.
Right-hand and left-hand, as used in this manual, is
determined by facing the direction the machine will travel
when in use.
The photos, illustrations, and data used in this manual
were current at the time of printing, but due to possible
production change, your machine can vary slightly. The
Manufacturer reserves the right to redesign and change
the machine as necessary without notification.

WARNING: Some pictures in this manual
show the machine with shields removed to
allow for a better view of the subject of the
picture. Never operate the machine with any
of the shields removed.
Divisions and Page Numbers
The service manual is separated into Divisions. Refer to
the Master Table of Contents.
Each Division has an identifying part number with an
alpha revision level indicator. Each Division has a Table of
Contents, Safety section and an Index.
Each page is identified with the Division part number and
revision level. Pages are in simple numeric order within
each Division.
UNITS OF MEASUREMENT
Measurements are given in metric units of measurement
followed by the equivalent in U.S. units. Hardware sizes
are given in millimeters for metric hardware and inches for
U.S. hardware.
REPLACEMENT PARTS
To receive prompt efficient service, always remember to
have the following information:
• Correct part description and part number.
• Model number of your machine.
• Serial number of your machine.
Find manuals at http://best-manuals.com/search?&s=CHAL-79023971