Challenger MT700 Series, Руководство по обслуживанию, Страница: 36 / 51

SAFETY
10 79023562 B Rev.
FIG. 21: Use a piece of cardboard or wood to search for
possible leaks, never use you hands.
Do not bend high-pressure lines. Do not strike
high-pressure lines. Do not install any lines that are bent
or damaged.
Check lines, tubes, and hoses carefully. Repair any lines
that are loose or damaged. Tighten all connections to the
recommended torque.
Replace the parts if any of the following conditions are
present:
• End fittings are damaged or leaking.
• Outer coverings are chafed or cut.
• Wires are exposed.
• Outer covering are ballooning.
• Flexible parts of the hoses are kinked.
• Outer covers have embedded armoring.
• End fittings are displaced.
FIG. 22: Electrolyte is an acid. Electrolyte can cause
personal injury. Do not allow electrolyte to contact the skin
or the eyes. Always wear protective glasses for servicing
batteries. Wash hand after touching the batteries and the
connectors.
FIG. 23: Gases from a battery can explode. Keep any
open flames or sparks away from the top of a batter. Do
not smoke in battery charging areas.
Never check the battery charge by placing a metal object
across the terminal posts. Do not lay tools or other
conductive materials on the battery.
Be careful when connecting booster cables to the
batteries. Electrical component damage or battery
explosion can result if booster cables are not installed
correctly.
Do not charge a frozen battery as it may explode. Warm
the batter to 16°C (60°F).
FIG. 21
D-5842a
FIG. 22
Wc1948
FIG. 23
00704135
Find manuals at http://best-manuals.com/search?&s=CHAL-79023971