Cetetherm PRESSOSMART MP195NL, Руководство пользователя, Страница: 24 / 45

24
TECHNICIAN MENU (Cont.)
HISTORY parameters
Press + to enter this sub-menu,
Refer to page 26 hereafter,
Press yellow

for next line,
SHOW
EVENT MEMORY
Scale correction
It allows to modify the measured pressure by an x factor
Press + or
– to change this factor,
Press yellow

for next line,
SCALE CORRECTION
1.00
SELF TEST parameters
Press + to enter this sub-menu,
Refer to page 26 hereafter,
Press yellow

,
SELF TEST
CLOSED VESSEL ONLY
Lack of water volume.Equivalent of the lack of water level sensor on
open tanks.
Prevents the pump(s) to start if not enough water inside the vessel.
When the measured water volume is above this value, pump(s) are
authorized to start if needed.
Press + or
– to change this factor,
Press yellow

for next line,
LACK OF WATER VOLUME
50L (if 500L vessel)
25L (if 200L vessel)
CLOSED VESSEL ONLY
Filling electrovalve water volume. The electrovalve remains energized
until this volume has been reached.
Equivalent of the low water level sensor on open tanks.
Press + or
– to change this factor,
Press yellow

for next line,
LOW WATER VOLUME
100L (if 500L vessel)
50L (if 200L vessel)
CLOSED VESSEL ONLY
Allows zero litre setting into the closed vessel.
TO DO WHILE COMMISSIONING WHEN THE VESSEL IS WATER
EMPTY ONLY !
To reset the volume, press on + key, then press both + and
– keys to
confirm.
Press yellow

for next line,
ZERO SETTING
SAVE MODIFICATIONS
At any time, you can interrupt the setting procedure and memorize the
changes by pressing the Validation key.
To memorize your modifications,
Press + for YES and
– for NO.
ANY PARAMETRE MODIFICATION SHOULD BE VALIDATED THIS
WAY