Cetetherm AquaEfficiency EFB112 DD, Инструкция по установке, обслуживанию и эксплуатации

Страница: 76 / 86

Cetetherm AquaEfficiency
Installation, service and operating instruction
74
Note : The operating mode must be set to "Normal" before a
control mode can be enabled.
13.
Return the main menu “Settings”.
14.
Select the line “Control mode”.
15. Press [OK].
16. Sel
ect ”Constant curve”.
17. Press [OK] to save the setting.
19.8 Enable/disable settings
In this display, the possibility of making settings can be disabled for protective reasons.
1.
Navigate from “Home” to “Settings”.
2.
Select the line “General settings”.
3. Press [OK].
4.
Select the line “Enable/disable settings”.
5. Press [OK].
6. To look the pump, use
and select “Disable”.
7. Press [OK] to save the setting.
The pump will now be locked for settings. Only the "Home"
display will be available.
To unlock the pump and allow settings, press both
simultaneously for at least 5 seconds.