Cetetherm AquaEfficiency EFB112 DD, Инструкция по установке, обслуживанию и эксплуатации

Страница: 52 / 86

Cetetherm AquaEfficiency
Installation, service and operating instruction
50
12.5.1 Display the trend buffer
1. Press key to access to Service Me
nu, then click on “Continue”.
2.
Select “Trending” in the menu.
3.
Select “Display Trend Buffer”.
4. Select the variable to display, S1 in this case, and press the wheel.
Date, time and temperature at the time can be read.
For example on 21
st of September at 14h22 was the temperature in S1 58°C.
12.6 Point Data
From the menu Point Data you can for example:
•
read or change binary or analog outputs
•
start and stop a pump
•
open or close control valve for example.
NOTE ! Once test is manually done and finished, remember to put the point on Automatic mode, logo .