Certance CP3100 D2D2T, Руководство пользователя

Страница: 47 / 101

Initial Setup Setting the Initial Configuration
48
2.
Enter the information described in the Password Settings page (see Table 4 on page 48).
3.
Click
Update
. A message confirms that the user password has been updated.
4. Record the password in Chapter 10.
Configuring Network Settings
The CP 3100 comes with a pre-configured IP address. When you log into RemoteAdmin for the first
time, you will most likely need to change the default IP address to suit the requirements of your net-
work. As part of this procedure, you can also specify the CP 3100 host name, network mask, and
default gateway.
1. Click CONFIGURATION , then click NETWORK . The Network Settings page appears (see
Figure 24 on page 49).
NOTE: The Password Settings page has a Reset button you can click to cancel your changes.
Table 4. Password Settings Page
Value Description
Old Password Your current password. For first-time login, leave this blank.
New Password The new password you want to use. The password is case-sensitive. For security
purposes, each password character appears as an asterisk (*).
Confirm Password The same password you typed for New Password. For security purposes, each
password character appears as an asterisk (*). If this password does not match
the New Password, an error message appears and the password is not changed.
NOTE: Typically, your system administrator will provide you with these settings. If not, check
with your system administrator before selecting these values.