Initial Setup
Setting the Initial Configuration
47
Specifying a Password
RemoteAdmin comes configured with no password. For security purposes, enter a password to
guard against unauthorized access. After entering the password, record it in Chapter 10.
1.
Click
CONFIGURATION
, then click
CHANGE PASSWORD
. The Password Settings page
appears (see Figure 23 on page 47).
Figure 23.
Password Settings Page
Table 3. Date/Time Settings Page
Value
Description
Date
Enter the current date, in mm/dd/yyyy format. Example: 05/09/2004 is equiva-
lent to May 9, 2004.
Time
Enter the current time, in 24-hour format using the syntax hh:mm:ss. You do not
need to specify AM or PM. Example: 14:18:56 is equivalent to 2:18:56 PM.
CAUTION: After you record the password, store it in a safe place for future reference. You will
not be able to access the CP 3100 if you lose the password.
