fghj
21
CBX
fig 15
Appendix 2, Mounting of flush pipe
Sensor and cable are cleaned with flush water from a hose or pipe connected to the cabinet.
A bushing with
½
” NPT male thread is located under the lower right hand corner of the
cabinet. Connect a hose or pipe of at least
½
”
diameter to fitting.
The water pressure must not exceed 6 bars (90 psi).
A last check before starting the CBX:
1. Check that the sensor cable is properly wound on drum and cable guide.
2. Check that all screws and nuts are properly tightened.
Appendix 3, wiring diagram
Connection box for power supply & rake limit switch
fig 16
Leveling screws
U-‐bolts for 1 ½”
handrail or 4”/6”
angled handrail.
Rake limit contact
N/O Contact 24VDC from CBX
