fghj
9
CBX
Fig 2
BB1/BB2 menu for CBX
This section describes the menus used in BB1/BB2 to set up the CBX for
operation.
! Important,
you need to exit the Settings menu to save the
parameters or changes!
Settings
Tag
Name of the sensor (10 characters) shown on the main
display.
I-‐Time[s]
Integration time or dampening -‐ can be set up to 999
seconds. This is integration in BB1/BB2. The value
coming from CBX is normally also an average.
Manual
up/down
Enables the BB1/BB2 to control the sensor in the CBX to
go UP and DOWN. In this mode the depth and
concentration are displayed in the BB1/BB2 . Must
change “MODE” to “TRIG” to activate.
Depth Unit
Unit used for distances in CBX settings in
m, cm, inches or feet & inches.
Cons units
Unit for measure in
”%”, ”ppm”, ”g/l”, or ”mg/l”