Installation Guide for FibeAir IP-20F
Page 41 of 63
Ceragon Proprietary and Confidential
To establish a connection between the PC and the IP-20F unit, it is necessary to have
an IP address on the PC within the same subnet as the unit. The default IP address of
the IP-20F unit is 192.168.1.1. Set the PC address to e.g. 192.168.1.10 and subnet mask
to 255.255.255.0. Note the initial settings before changing.
Note:
The chassis IP address, as well as password, should be changed
before the system is set in operation. For more information on
these procedures, refer to the User Guide for FibeAir IP-20F, IP-20G,
and IP-20GX
.
1 Select Control Panel> All Control Panel Items >Network and Sharing Center.
2 Click Change adapter settings.
3 Select Local Area Connection> Properties> Internet Protocol Version 4 (TCP/IP).
o
IP address: 192.168.1.10
o
Subnet mask 255.255.255.0
o
No default gateway
4 Press
OK
to apply the settings.
