Installation Guide for FibeAir IP-20F
Page 45 of 63
Ceragon Proprietary and Confidential
7.5
Applying a Pre
-
Defined Configuration File
IP-20 units can be configured from the Web EMS in a single step by applying a pre-
defined configuration file. A pre-defined configuration file can be prepared for multiple
IP-20 units, with the relevant configuration details specified and differentiated per-
unit.
The pre-defined configuration file is generated by Ceragon Global Services and
provided as a service.
The pre-defined configuration file must be compatible with the CeraOS version the IP-
20 device is running. Configuration files must also be compatible with the type of IP-20
device. For example, a configuration file created for IP-20G cannot be applied to an IP-
20F device.
If you need to change the IDU-RFU connection settings from the default settings of RJ-
45 with PoE, you must do so manually after applying the pre-defined configuration file.
See
on page 38. For configuration instructions, see
Configuring the IDU-RFU Connection (IP-20F only)
in the
User Guide for FibeAir IP-20F,
IP-20G, and IP-20GX
.
For further information on the creation of pre-defined configurations, consult your
Ceragon representative.
To apply a pre-defined configuration file:
1 Select
Quick Configuration > From File
. The Quick Configuration
–
From File page
opens.
Figure 14: Quick Configuration
–
From File Page
