CENTURION SYSTEMS VANTAGE 400, Руководство по механическому монтажу

Страница: 39 / 44

page 39 www.CentSys.com
S
ECTION
1
0
10.5. Step 5
Fit the Gate Bracket to the
VANTAGE .
FIGURE 32
Pin
Gate
Bracket
Origin
clamp
VANTAGE
operator
FIGURE 33
VANTAGE
operator
Wall
Pin
Wall
Bracket
FIGURE 34
Set the origin
clamp to
closed limit
G-clamp or
spot weld
Gate in closed
position
Wall
Bracket
VANTAGE
operator
10.6. Step 6
Fit the motor end of the operator to
the Wall Bracket.
Support the operator to
prevent damage
OPERA
TOR
INS
TALLATION
-
OUTW
ARD
OPENING
GATES
10.7. Step 7
Manually rotate the piston to the fully
retracted position, and then extend it
by half to one full turn.
With the gate in the closed position,
use a G-clamp or spot weld the Gate
Bracket in position to temporarily
hold the Gate Bracket in place.
The G-clamp should only
be used to secure the Gate
Bracket in place, and should
never be used as a means of
securing the operator piston
arm as this could result in
damage.