CENTURION SYSTEMS RDO II, Руководство по установке

Страница: 3 / 24

- 3 -
INSTALLATION MANUAL – RDO
14. The correct function of the Safety Obstruction Reversing System should be checked on a
monthly basis. Make sure that the garage door reverses when it makes contact with an
obstruction.
15. Never use the RDO II unless the garage door is in full view and free from objects such as cars,
children and/or adults.
16. Never allow children to operate the RDO II.
17. Never operate the RDO when children/persons are under or near the path of the door. Children
must
be supervised at all times when near the garage door and when the RDO II is in use.
18. Never attempt to disengage the RDO to manual operation when there are children/persons and/or
other objects including motor vehicles under or near the path of the garage door.
19. Never attempt to open or close the garage door by pulling on the Manual Release Cord.
20. Never attempt to make any repairs or remove covers from the RDO II without first disconnecting
the power supply cord from main power supply.
21. For additional safety, we strongly recommend the fitment of Safety Beams. Although the RDO II
incorporates a pressure sensitive safety obstruction system, the addition of Safety Beams will
greatly enhance the operating safety of the Automatic Garage Door and provide additional peace
of mind. In some countries, it is a mandate of law to fit Safety Beams. It is the sole responsibility
of the owner/installer to fit Safety Beams in those countries which so require.
22. Removal of the RDO II’s protective covers must only be performed by a technically qualified
person. Attempting to remove the protective covers or repair the RDO II without suitable
technical qualification may result in severe personal injury, death and/or property damage.
23. Always ensure that the garage door is fully open before driving into or out of the garage.
24. Always ensure the garage door is fully closed before leaving the driveway.
25. Adjustments to the Safety Obstruction Force settings must only be carried out by a technically
qualified person. Attempting to adjust the Safety Reverse Force setting without suitable technical
qualification may result in severe personal injury, death and/or property damage.
26. Keep hands and loose clothing clear of the garage door and product at all times.
27. In order for the Safety Obstruction Force System to function it must first encounter an
object/person on to which some force MUST be exerted. As a result the object/person/door may
suffer DAMAGE OR INJURY.
28. The Safety Obstruction Force System is designed to work on STATIONARY objects only. If
the garage door encounters a moving object during an Open or Close Cycle, serious
personal injury, death and/or property damage may occur.