CENTURION SYSTEMS RDO II, Руководство по установке

Страница: 17 / 24

- 17 -
INSTALLATION MANUAL – RDO
12.3. Function Three – Holiday Lockout
Learning a button to Function Three will enable that button to electronically lock the controller for use. In other words,
no transmitters or inputs will be able to trigger the operator.
Operation
To engage Holiday Lockout Mode, the button learned to engage this function must be pressed for three seconds before
Holiday Lockout Mode will engage. The courtesy light will emit a single flash. When disengaging Holiday Lockout
Mode, a double flash indicate likewise. When the door reaches the closed position, the courtesy light will remain in the
ON state and time out as per normal. Should a button which operates Function One other than any of those associated
with Holiday Lockout Mode be pressed whilst the operator is locked, the LIGHT will flash twice to indicate the
operator is locked. The associated transmitter/wall pendant button must be pressed for three seconds before the Holiday
Lockout Mode will engage/disengage. If the door is in the closed position, the lock will engage immediately. However,
if the door is in the open or partially open position, the door will first close before engaging Holiday Lockout.
Learning procedure
Press the Learn button THREE times to select Function Three Learn. If the operator is still in Learn Mode, the Learn
button need only be pressed once. The LIGHT and LED will flash three times every two seconds to indicate that
Function Three learn has been selected. Take the remote control or wall pendant that must be learned into the system
and press and hold the desired button for three seconds. The LIGHT and LED will flash three times to confirm that the
button has been successfully learned into Function Three, allowing activation of Holiday Lockout Mode as described
below. The system will remain in this learn mode for 10 seconds after the last remote or wall pendant is learned and
automatically exit after this time. The function can be learned to any button, provided that the button has not yet been
learned to another function.
12.4. Function Four – Autoclose Override
This function will allow the associated button to override the Autoclose function if it has been selected, resulting in the
door staying open.
Operation
The operation of this function is described as follows:
12.4.1. With the door in the closed position, the Autoclose Override button must be pressed and held for at least
three seconds to engage/activate this function
12.4.2. The light will flash quickly a number of times and simultaneously the buzzer will emit multiple beeps to
confirm the operation of this function
12.4.3. The door will also operate to open and stay open without Autoclosing
12.4.4. Pressing the open/close button will trigger the door to close
Learning procedure
Press the Learn button FOUR times to select Function Four Learn. If the operator is still in Learn Mode, the Learn
button need only be pressed once. The LIGHT and LED indicator will flash four times every two seconds, indicating
that Function Four learn has been selected. To learn a button to this function, press and hold the desired button for three
seconds. The LIGHT will flash three times to confirm that the button has been successfully learned into Function four.
The system will remain in this learn mode for 10 seconds after the last remote or wall pendant is learned and
automatically exit after this time. The button can be learned to any function, provided that the button has not yet been
learned to another function.
12.5. Delete Remotes
All remote control codes may be deleted as follows:
12.5.1. Hinge open the Courtesy Lamp Cover to expose the ‘Learn’ Button
12.5.2. Momentarily press the ‘Learn’ Button - LED Indicator will flash slowly
12.5.3. Press and hold the black ‘Run’ Button - LED indicator will begin to rapid flash.
12.5.4. All remote control codes will have been deleted once the LED indicator ceases to flash
12.5.5. Close the Courtesy Lamp Cover