Schedule
3.2. - 3.4. TABLE 1, 2, 3
Possibility of schedule is done using tables
.
They can be pre-set 3 tables of schedule of which only
one table can be active
.
It is possible for every day of the week set 3 turning-on and 3 turning-off the
boiler. Turn-on is marked by a green field and turn-off is marked with red field. You can adjust the
starting times for one day and copied the same starting times to all other days. After setting the
starting times for one day you have to click on the field that day (the whole day will be marked), on the
right side will show the button
’’COPY’’
. Press this key (now you have copied the setting of that day
and now will show button
’’PASTE’’
). It is necessary to press the day for which you want this settings
and press the button
’’PASTE’’
. After that, the same starting time will be copied in the selected day.
If you want the same settings for the other days, just select the desired day and press button
’’PASTE’’
. After filling the table with the starting times, press button
’’BACK’
, and press button
’’CONFIRM’’
for saving this settings.
Schedule - Table 1 (Table 2 or Table 3)
MON
TUE
WED
THU
FRI
SAT
SUN
06:00
22:00
06:00
06:00
06:00
06:00
06:00
06:00
22:00
22:00
22:00
22:00
22:00
22:00
2
Button ’’COPY’’
Button ’’PASTE’
Button ’’up’
Button ’’DOWN’
Button ’’RIGHT’
Button ’’CONFIRM’’
1
Get Started
End of work
1
2
Technical instructions REGULATION
PelTec / PelTec-lambda
45
