5
ENGLISH
7. RETURN TO
Cembre
FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by
Cembre
together with the tool or fi ll in and attach
the form available in the “ASSISTANCE” section of the
Cembre
website.
The guarantee is void if parts used are not
Cembre
original spares.
When ordering spare parts always specify the
following:
- code number of item
- name of item
- type of tool
4. CONDUCTOR ASSEMBLY
(Ref. to Figs. 10 and 11)
– Insert the special bolt (with recessed head) through the copper bush. The screw thread should
protrude from the fl ange side of the bush; the recessed bolt head will tighten onto the web of
the rail and not onto the bush (Fig. 10).
– Crimp the lug onto the conductor. Assemble the lug to the fl ange of the bush over the protruding
bolt.
– Fit the fl at washer and the self-locking nut (Fig. 11).
5. WARNING
The tool is robust and requires very little daily maintenance.
Compliance with the following points should help to maintain the optimum performance of the tool.
5.1) Accurate cleaning
Dust, sand and dirt are a danger for any mechanical device.
Avoid putting the head on muddy or dusty ground.
Every day, after use, the head must be cleaned with a clean cloth, taking care to remove any residual
particles, especially around the moving parts.
5.2) Storage
(Ref. to Fig. 1)
When not in use, the tool should be stored and transported in the canvas bag, to prevent damage.
Canvas bag:
"CVB-016"
size 350x130 mm; weight 0,14 kg.
The bag will also store the "GO/NO GO" gauge
and the two plungers.
6. PART LIST
(Ref. to Fig. 12)
Code N°
Item
DESCRIPTION
Qty
6134045
01
RATCHET HANDLE
1
6371013
02
ADJUSTMENT LOCK RING
1
6900592
03
NUT
1
6402006
04
WASHER
2
6700253
05
CIRCLIP ø 38
1
6780143
06
SUPPORT
1
6040703
07
RING
1
6900625
08
SCREW
1
6460455
09
LEAD SCREW
1
6402009
10
THRUST WASHER
1
