ENGLISH
The part references “B35-50D ; B35-50DA” include the following:
– Basic tool complete with battery
– Spare battery
– Battery charger complete with CBA96-144 adapter
– Plastic carrying case VAL P22
The tool can be held in one hand while positioning the connector with the other.
Residual battery capacity level is automatically displayed after every cycle.
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
B35-50D ; B35-50DA
1. GENERAL CHARACTERISTICS
3
32
B35-50DA
suitable for installing electrical compression connectors
for conductors up to 150 mm
2
(300 MCM)
35 (4)
390 (5,600)
372 x 108 x 66 (14,6 x 4.17 x 2.6)
2.4 (5.3)
9.6
9.6 / 2.0 Ni-MH
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent.
the tool is equipped with a maximum pressure valve.
-15°C to +40°C (+5°F to +104°F)
Application range:
Crimping force
kN (sh ton):
Rated operating pressure bar (psi):
Dimensions LxWxH mm
(inches):
Weight with battery
kg (lbs):
Motor Volt
DC:
Battery type CB9620H
Volt / Ah:
Battery charger supply
Volt / Hz:
Recommended oil:
Safety:
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
pA
is equal to ............................................................................. 66,8 dB (A)
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
pCPeak
is .....................................................................< 130 dB (C)
– The acoustic power level emitted by the machine
L
WA
is equal to ............................................................................................................... 75 dB (A)
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1
st
Standards, and under operating conditions much more severe than those normally found,
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
2
.
TOOL TYPE:
B35-50D
220 - 240 / 50 - 60
120 / 50 - 60
TABLE 2 - TABLEAU 2 - TABELLE 2
- TABLA 2 - TAVOLA 2
57
4
19
18
1
250
10
9
8
210
20
16
17
15
11
8
6
21
57
300
15
100
11
220
500
18
17
400
7
9
