manualshive.com logo in svg

Cellink BIO X 3D Bioprinter, Руководство пользователя, Страница: 6 / 75

Поделиться
Скачать
Cellink BIO X 3D Bioprinter Скачать руководство пользователя страница 6

6

1. Safety information

Before you start using BIO X, please take time to review the entire manual and the 

manuals for any accessories. Mishandling of  BIO X can lead to severe and irreversible 

injuries if  the safety instructions are not followed. Throughout the manual we will 

use the following symbols to indicate if  there is risk of  personal injury or equipment 

damage:

CELLINK AB

Arvid Wallgrens Backe 20

Gothenburg, SE 41346

SWEDEN

1.1 General safety information

In order to respond to BIO X and its relevant security requirements, all personnel using 

BIO X must have read through the entire manual. Should anything appear out of  order 

or a situation occur that is not described in the manual, contact CELLINK before using 

the instrument any further!

Use the instrument only for its intended purpose as described in the documentation. Do 

not modify the instrument, sub-components or accessories. Do not open or disassemble 

BIO X or attempt any service beyond the maintenance instructions provided in the 

manual. BIO X and the CELLINK intelligent printheads are only to be used with each 

other, not with other equipment.

This symbol indicates that there is risk of  personal injury or equipment 

damage due to harmful UV radiation in BIO X. Always keep the door 

of  BIO X closed and wear proper safety equipment when using the UV 

sterilization or UV curing systems. This symbol will also be visible on BIO 

X’s touch screen at any time a UV LED is active.

Caution! Never reach into the instrument until all components have come 

to a complete stop. Moving parts can cause injury.

This symbol indicates that there is a general risk of  personal injury or 

equipment damage due to reasons not related to UV radiation or heated 

surfaces.

Caution! Before cleaning or servicing BIO X, turn off  the power and 

disconnect the instrument from any power sources and external air pressure 

sources.

This symbol indicates that there are surfaces in BIO X that are heated and 

might cause personal injury or material damage if  not handled with care. 

Beyond the manual, the physical surface with a heating function will be 

marked with this symbol in BIO X. This symbol will also be visible on BIO X’s

touch screen at any time a surface in the printchamber is heated.

Manufacturer

Содержание BIO X 3D Bioprinter












































































Отзывы:

Нет отзывов