Cellink BIO X 3D Bioprinter, Руководство пользователя, Страница: 39 / 75

39
4.2 Bioprinting droplets
Choose Printer setup
In the next step you can configure the printhead, the bioink and the printer settings.
This step allows you to customs your printing according to your experiment.
1. Navigation bar – Use this to toggle between the settings for the different
printheads and the printbed.
2. Toggle printhead – Tap to select if you want to use the printhead or not.
If you select to use the printhead further settings will appear.
3. Bioink profile – Select the bioink profile you want to use or create a new
one. BIO X comes preloaded with profiles for all CELLINK’s bioinks.
4. Printhead type – Select the type of printhead you want to use.
5. Extrusion time – You can choose the extrusion time for printing the
droplets by placing the slider on the graduated scale.
6. Pressure - Allows you to choose the pressure used to extrude.
7. Temperature - Allows you to choose the temperature of the printhead.
2
1
3
4
6
7
5